Forum Discussion
Kai_Wilke
Mar 09, 2017MVP
Hi Jari,
a IPv6 subnet of
/127
contains just the network and broadcast address without any usable IP addresses left over for your F5. Even if you're going to use the network and broadcast address for your Self/Floating IP you'll need at least 3 unique IPs within the same subnet which require at least a /126
mask.
You may try to increase the subnetmask on your end (without informing your ISP) and then put the Float-IP into the range of the assigned
/127
subnet and the Self-IPs on the remaining non-assigned /126
subnet. This will allow the ISP to communicate with your Floating-IP (important) but not your Self-IPs (most likely not required).
But I guess the better option would be to ask your ISP to increase the size of the transfer network to a mask of
/126
or even /125
. IPv6 addresses aren't that rare... 😉
Cheers, Kai