Forum Discussion

jstauffacher_11's avatar
jstauffacher_11
Icon for Cirrus rankCirrus
Feb 27, 2014
Solved

OSPF Route adverts ( active / passive )

I have a pair of Viprions that are setup active/passive -- both connected to their upstream via OSPF. I see the active member is actually advertising the routes -- but the passive member does not. Is...
application delivery
deployment
design
performance
TMOS
TMSH
  • John_Heyer_1508's avatar
    John_Heyer_1508
    Jan 05, 2015

    I've never run OSPF on an F5 beforem but this sounds normal. Generally speaking in an active/standby pair of network devices, only the active device will establish an OSPF adjacency. The adjacency has to be re-established at failover unless both sides support NSF.

     

John_Heyer_1508's avatar
John_Heyer_1508
Icon for Cirrostratus rankCirrostratus
Jan 05, 2015

I've never run OSPF on an F5 beforem but this sounds normal. Generally speaking in an active/standby pair of network devices, only the active device will establish an OSPF adjacency. The adjacency has to be re-established at failover unless both sides support NSF.