Forum Discussion
nitass_89166
Noctilucent
i did a bit test (below) but it did not work. so, it seems you have to modify configuration file directly (i.e. bigip_base.conf and bigip.conf) and then force mcpd to reload the configuration.
existing pool
root@ve10(Active)(tmos) list ltm pool foo
ltm pool foo {
members {
200.200.200.101:http { }
}
}
existing connected subnet
root@ve10(Active)(tmos) list net self 200.200.200.16/24
net self 200.200.200.16/24 {
allow-service default
vlan internal
}
new vlan
root@ve10(Active)(tmos) create net vlan newvlan interfaces add { 1.2 { tagged } }
new selfip
root@ve10(Active)(tmos) create net self 222.222.222.16/24 vlan newvlan allow-service default
new route but error
root@ve10(Active)(tmos) create net route 200.200.200.0/24 gw 222.222.222.254
01070666:3: Static route duplicates Self IP 200.200.200.0 / 255.255.255.0 implied route
delete selfip but error
root@ve10(Active)(tmos) delete net self 200.200.200.16/24
01070605:3: Cannot delete IP 200.200.200.16 because it would leave a pool member (pool foo) unreachable.
Frankie_John-Le
Sep 01, 2014Nimbostratus
Change the Subnet Mask on the Self-IP from a /24 to a /32 (255.255.255.255). This will then allow you to delete the Self-IP from the configuration