Forum Discussion
Steele6599_8766
Nimbostratus
Thanks all for your response, it has been almost 4 years since I last worked with an F5. currently "Source Address Translation" is set to "Auto Map" and other choices are "None" and "SNAT". So should I choose "none"?
Thanks again.
Cory_50405
Mar 25, 2014Noctilucent
If you don't use SNAT, the hub transport servers will have to have a route back to the clients through the BIG-IP, which is probably not the case. SNAT auto map should work as long as you build the connector in Exchange with the SNAT address of the BIG-IP.