Strange issue with SNAT stats, pinging self IP and Allow None

Regarding SNAT issue, can anyone explain ehat this output means:

show ltm snat LAMP_subnet_to_ext detail

---------------------------------
Ltm::SNAT: LAMP_subnet_to_ext
---------------------------------
Traffic                ClientSide
  Bits In                   30.5K
  Bits Out                  29.7K
  Packets In                   82
  Packets Out                  82
  Current Connections           1
  Maximum Connections           5
  Total Connections            19

  -------------------------------------
  | Ltm::SNAT Pool: SNAT_to_Internet_pl
  -------------------------------------
  | Traffic                ServerSide
  |   Bits In                       0
  |   Bits Out                      0
  |   Packets In                    0
  |   Packets Out                   0
  |   Current Connections           0
  |   Maximum Connections           0
  |   Total Connections             0

SNAT object is using SNAT Pool, SNAT pool is not seeing any traffic (so no src IP translations) but SNAT object sees traffic and even has open connections.

But when doing

tmsh show sys connections

10.128.30.151:123 194.146.251.101:123 10.129.10.13:123 194.146.251.101:123 udp 169 (tmm: 0) 192.168.1.2:51914 192.168.1.1:1026 192.168.1.2:51914 192.168.1.1:1026 udp 0 (tmm: 0) 192.168.1.1:38978 192.168.1.2:1026 192.168.1.1:38978 192.168.1.2:1026 udp 0 (tmm: 0) 10.128.40.239:56372 10.128.40.110:8081 10.128.40.239:56372 10.128.40.110:8081 tcp 0 (tmm: 0)

So sure there are connections from subnet set in SNAT object (10.128.30.0/24) but those are handled by wildcard VS (server side src IP 10.129.10.13 - floating self ip - snat automap).

So what's going on here?

Stats stops to increase when I set Disable On in SNAT with internal VLAN selected. Is I have Enabled on with empty Selected then stats are still increasing.

Piotr