System Shutdown & Reboot Procedures for F5 Viprion & Standalone devices - Advice required on urgent basis

As per the above activity plan we require confirmation on below,

1) As mentioned in below procedure for moving the vCMP from deployed state to provisioned state using the tmsh prompt and command “modify vcmp guest all state provisioned”. I believe we would be doing this on the standby host where we have the vCMP in standby state. Correct me if I’m wrong. Also let us know what we need to do to bring back these vCMP back to deployed state once we are in step 3 of the activity (mentioned above). Do we need to run any command here again to achieve this status ? Kindly confirm.

2) After we run, the above command assuming all the vCMP into the provisioned state, we need to run the command “clsh shutdown now” to bring down the host. We assume this will bring down all the services on the Viprion host. At this point does the host is powered off state or do we need to power off the system by disconnecting the power at source ? Kindly confirm.

3) After we move the device (Standby state) to new rack. Do we need to simply power on the system to bring back to normal running status ? Or do we need to do anything additional here. Kindly confirm.

Kindly confirm on above queries to us ASAP. All help appreciated.