GlobalLB DNS create and state examples using PowerShell

Problem this snippet solves:

This PowerShell example illustrates how to perform the following GTM tasks using the iControl Cmdlets for PowerShell.

  • GTM Data Center (Create, Enable, Disable)
  • GTM Server (Create)
  • GTM Virtual Server (Create, Enable, Disable)
  • GTM Pool (Create)
  • GTM Wide IP (Create)

How to use this snippet:

The script includes sample usages in the main script logic. You will have to change the input parameters to account for your specific configurations.

  1. Save script as GlobalLBCreate.ps1
  2. Edit main script logic to perform the tasks you are interested in.
  3. $ .\GlobalLBCreate.ps1 bigip_addr bigip_user bigip_pass

Code :

#----------------------------------------------------------------------------
# The contents of this file are subject to the "END USER LICENSE AGREEMENT FOR F5
# Software Development Kit for iControl"; you may not use this file except in
# compliance with the License. The License is included in the iControl
# Software Development Kit.
#
# Software distributed under the License is distributed on an "AS IS"
# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
# the License for the specific language governing rights and limitations
# under the License.
#
# The Original Code is iControl Code and related documentation
# distributed by F5.
#
# The Initial Developer of the Original Code is F5 Networks,
# Inc. Seattle, WA, USA. Portions created by F5 are Copyright (C) 1996-2016 F5 Networks,
# Inc. All Rights Reserved.  iControl (TM) is a registered trademark of F5 Networks, Inc.
#
# Alternatively, the contents of this file may be used under the terms
# of the GNU General Public License (the "GPL"), in which case the
# provisions of GPL are applicable instead of those above.  If you wish
# to allow use of your version of this file only under the terms of the
# GPL and not to allow others to use your version of this file under the
# License, indicate your decision by deleting the provisions above and
# replace them with the notice and other provisions required by the GPL.
# If you do not delete the provisions above, a recipient may use your
# version of this file under either the License or the GPL.
#----------------------------------------------------------------------------
param (
  $g_bigip = $null,
  $g_uid = $null,
  $g_pwd = $null
);

Set-PSDebug -strict;

#-------------------------------------------------------------------------
function Write-Usage()
#-------------------------------------------------------------------------
{
  Write-Host "Usage: GlobalLBCreate.ps1 host uid pwd";
  exit;
}

#-------------------------------------------------------------------------
function Create-GTMDataCenter()
#-------------------------------------------------------------------------
{
  param(
[string]$name = $null,
[string]$location = $null,
[string]$contact = $null
);

if ( $name -and $location -and $contact ) {
$data_center = New-Object -TypeName iControl.GlobalLBDataCenterDataCenterAttribute;
$data_center.name = $name;
$data_center.location = $location;
$data_center.contact = $contact;
$data_centerA = (, $data_center);

(Get-F5.iControl).GlobalLBDataCenter.create($data_centerA);
} else {
Write-Usage;
}
}

#-------------------------------------------------------------------------
function Set-GTMDataCenterState()
#-------------------------------------------------------------------------
{
param(
[string]$name = $null, 
[string]$state = $null
);

if ( $name -and $state ) {
$data_center = $name;
$data_centerA = (, $name);

$dc_state = $state;
$dc_stateA = (, $dc_state);

(Get-F5.iControl).GlobalLBDataCenter.set_enabled_state(
$data_centerA,
$dc_stateA
);
} else {
Write-Usage;
}

}

#-------------------------------------------------------------------------
function Create-GTMServer()
#-------------------------------------------------------------------------
{
param(
[string]$server = $null,
[string]$server_ip_device = $null,
[string]$server_ip_addresses_on_device = $null,
[string]$type = $null,
[string]$data_center = $null
);

if ( $server -and $server_ip_device -and $server_ip_addresses_on_device -and $type -and $data_center ) {
$serverA = (, $server);

$server_ips = New-Object -TypeName iControl.GlobalLBServerServerIPs;
$server_ips.device = $server_ip_device;
$server_ips.addresses_on_device = $server_ip_addresses_on_device.Split(",");
$server_ipsA = (, $server_ips);
$server_ipsAofA = (, $server_ipsA);

$typeA = (, $type);

$data_centerA = (, $data_center);

(Get-F5.iControl).GlobalLBServer.create_v2(
$serverA,
$server_ipsAofA,
$typeA,
$data_centerA
);
} else {
Write-Usage;
}
}

#-------------------------------------------------------------------------
function Create-GTMVirtualServer()
#-------------------------------------------------------------------------
{
param(
[string]$vs_name = $null,
[string]$vs_server = $null,
[string]$vs_address = $null,
[string]$vs_port = $null
);

if ( $vs_name -and $vs_server -and $vs_address -and $vs_port) {
$virtual_server = New-Object -TypeName iControl.GlobalLBVirtualServerID;
$virtual_server.name = $vs_name;
$virtual_server.server = $vs_server;
$virtual_serverA = (, $virtual_server);

$address = New-Object -TypeName iControl.CommonIPPortDefinition;
$address.address = $vs_address;
$address.port = $vs_port;
$addressA = (, $address);

(Get-F5.iControl).GlobalLBVirtualServerV2.create(
$virtual_serverA,
$addressA
);
} else {
Write-Usage;
}
}

#-------------------------------------------------------------------------
function Set-GTMVirtualServerState()
#-------------------------------------------------------------------------
{
param(
[string]$vs_name = $null, 
[string]$vs_server = $null, 
[string]$vs_state = $null
);

if ( $vs_name -and $vs_server -and $vs_state ) {
$virtual_server = New-Object -TypeName iControl.GlobalLBVirtualServerID;
$virtual_server.name = $vs_name;
$virtual_server.server = $vs_server;
$virtual_serverA = (, $virtual_server);

$state = $vs_state;
$stateA = (, $state);

(Get-F5.iControl).GlobalLBVirtualServerV2.set_enabled_state(
$virtual_serverA,
$stateA
);
} else {
Write-Usage;
}
}

#-------------------------------------------------------------------------
function Create-GTMPool()
#-------------------------------------------------------------------------
{
param(
[string]$name = $null,
[string]$lb_method = $null,
[string]$vs_name = $null,
[string]$vs_server = $null,
[long]$order = $null
);

if ( $name -and $lb_method -and $vs_name -and $vs_server -and $order) {

$pool_nameA = (, $name);
$lb_methodA = (, $lb_method);

$member = New-Object -TypeName iControl.GlobalLBVirtualServerID;
$member.name = $vs_name;
$member.server = $vs_server;
# For greater than one member, create muliple members add add them to $memberA
$memberA = (, $member);
$memberAofA = (, $memberA);
$orderA = (, $order);
$orderAofA = (, $orderA);

(Get-F5.iControl).GlobalLBPool.create_v2(
$pool_nameA,
$lb_methodA,
$memberAofA,
$orderAofA
);
} else {
Write-Usage;
}
}

#-------------------------------------------------------------------------
function Create-GTMWideIp()
#-------------------------------------------------------------------------
{
param(
[string]$name = $null,
[string]$lb_method = $null,
[string]$pool_name = $null,
[long]$pool_order = $null,
[long]$pool_ratio = $null,
[string]$rule_name = $null,
[long]$rule_priority = $null
);

if ( $name -and $lb_method -and $pool_name -and $pool_order -and $pool_ratio -and $rule_name -and $rule_priority ) {
$wide_ipA = (, $name);

$lb_methodA = (, $lb_method);

$wideip_pool = New-Object -TypeName iControl.GlobalLBWideIPWideIPPool;
$wideip_pool.pool_name = $pool_name;
$wideip_pool.order = $pool_order;
$wideip_pool.ratio = $pool_ratio;
$wideip_poolA = (, $wideip_pool);
$wideip_poolAofA = (, $wideip_poolA);

$wideip_rule = New-Object -TypeName iControl.GlobalLBWideIPWideIPRule;
$wideip_rule.rule_name = $rule_name;
$wideip_rule.priority = $rule_priority;
$wideip_ruleA = (, $wideip_rule);
$wideip_ruleAofA = (, $wideip_ruleA);

(Get-F5.iControl).GlobalLBWideIP.create(
$wide_ipA,
$lb_methodA,
$wideip_poolAofA,
$wideip_ruleAofA
);
} else {
Write-Usage;
}
}


#-------------------------------------------------------------------------
function Do-Initialize()
#-------------------------------------------------------------------------
{
  if ( (Get-PSSnapin | Where-Object { $_.Name -eq "iControlSnapIn"}) -eq $null )
  {
    Add-PSSnapIn iControlSnapIn
  }
  $success = Initialize-F5.iControl -HostName $g_bigip -Username $g_uid -Password $g_pwd;
  
  return $success;
}

#-------------------------------------------------------------------------
# Main Application Logic
#-------------------------------------------------------------------------
if ( ($g_bigip -eq $null) -or ($g_uid -eq $null) -or ($g_pwd -eq $null) )
{
  Write-Usage;
}

if ( Do-Initialize )
{
# ---------------------------------------
# Example Usages
# ---------------------------------------

#Create-GTMDataCenter -name "test_dc" -location "test_location" -contact "Joe"
# Set-GTMDataCenterState -name "test_dc" -state "STATE_DISABLED";
# Set-GTMDataCenterState -name "test_dc" -state "STATE_ENABLED";

#Create-GTMServer -server "test_server" -server_ip_device "test_device" -server_ip_addresses_on_device "10.10.10.10,10.10.10.20" -type "SERVER_TYPE_GENERIC_LOAD_BALANCER" -data_center "test_dc"

#Create-GTMVirtualServer -vs_name "test_vs" -vs_server "test_server" -vs_address "10.10.10.10" -vs_port "80"
# Set-GTMVirtualServerState -vs_name "test_vs" -vs_server "test_server" -vs_state "STATE_DISABLED";
# Set-GTMVirtualServerState -vs_name "test_vs" -vs_server "test_server" -vs_state "STATE_ENABLED";

#Create-GTMPool -name "test_pool" -lb_method "LB_METHOD_ROUND_ROBIN" -vs_name "test_vs" -vs_server "test_server" -order 1

#Create-GTMWideIp -name "testwip.foo.com" -lb_method "LB_METHOD_ROUND_ROBIN" -pool_name "test_pool" -pool_order 1 -pool_ratio 1 -rule_name "test_rule" -rule_priority 1
}
else
{
  Write-Error "ERROR: iControl subsystem not initialized"
}

Tested this on version:

11.5
Published Sep 07, 2016
Version 1.0

Was this article helpful?

No CommentsBe the first to comment