Forum Discussion

Darren_Young_10's avatar
Darren_Young_10
Icon for Nimbostratus rankNimbostratus
Nov 18, 2010

LTM VE High Availability

I have 2 F5 LTM VM's up and running, let's call them Unit_A and Unit_B, configs are:

 

 

Unit_A

 

Mgmt: 192.168.0.250/255.255.255.0

 

Internal: 192.168.50.104/255.255.255.0

 

External: 10.135.211.104/255.255.255.0

 

 

Unit_B

 

Mgmt: 192.168.0.251/255.255.255.0

 

Internal: 192.168.50.110/255.255.255.0

 

External: 10.135.211.110/255.255.255.0

 

 

I'm going to configure HA between them and was wondering what I would use for the network failover unicast addresses. There's no way to dedicate an interface to a HA VLAN using the virtual edition. Is there some internal hardware xover for HA?

 

config
design

4 Replies

Sort By
  • Paul_Szabo_9016's avatar
    Paul_Szabo_9016
    Historic F5 Account
    Nov 18, 2010
    > . There's no way to dedicate an interface to a HA VLAN using the virtual edition

     

     

    Is that because your VCenter setup won't let you do it? You can certainly add a third vlan to a third VMWare interface and use it for the HA vlan.

     

     

    However I'd only do this if I needed to do connection or persistence/session mirroring. The way most ESX clusters are setup the BIG-IP's management port and data ports probably go out the same physical interface, so there's no extra redundancy for running network failover over both the management and dataplane interfaces. You can just use use the virtual management interface.

     

     

    Paul
  • Hamish's avatar
    Hamish
    Icon for Cirrocumulus rankCirrocumulus
    Nov 19, 2010
    You can add more...

     

     

    See the article by Jason @

     

     

    http://devcentral.f5.com/Tutorials/TechTips/tabid/63/articleType/ArticleView/articleId/1082331/Whaddya-Mean-LTM-VE-Only-Has-Two-Interfaces.aspx

     

     

     

    H