BigIP AOM issue
Hi all I have an issue with the setup of AOM on a LoadBalancer. With "ssh aom" I don't get access to the subsystem. This ssh shows the following error:
[...@BIPB:Standby] ~ ssh -v aom OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /config/ssh/ssh_config debug1: Applying options for aom debug1: Applying options for * debug1: Connecting to aom [127.2.0.1] port 22. debug1: connect to address 127.2.0.1 port 22: No route to host ssh: connect to host aom port 22: No route to host
For troubleshooting I did those steps:
-
checking iptables:
[...@BIPB:Standby] ~ iptables -nvL
Chain INPUT (policy ACCEPT 4007K packets, 381M bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 4909K packets, 437M bytes) pkts bytes target prot opt in out source destination
- Relevant entries in /etc/hosts: [...@BIPB:Standby] ~ cat /etc/hosts
127.0.0.1 localhost.localdomain localhost sysname.domain.com 127.2.0.1 sccp aom AOM 127.2.0.2 sysname.domain.ch 127.1.1.2 tmm 127.1.1.3 tmm1 127.1.1.4 tmm2 127.1.1.5 tmm3
-
ping aom [...@BIPB:Standby] ~ ping aom PING sccp (127.2.0.1) 56(84) bytes of data. From sysname.domain.ch (127.2.0.2) icmp_seq=2 Destination Host Unreachable From sysname.domain.ch (127.2.0.2) icmp_seq=5 Destination Host Unreachable
-
routing [...@BIPB:Standby] ~ netstat -rnv | sort . . 127.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 tmm0 127.2.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0.1 . .
-
installed AOM packages [...@BIPB:Standby] ~ rpm -qa | grep aom aom-software-1.0.F5-10.1.10.100.6.0 f5config-aom-10.2.4-577.0 aom-firmware-1.4-10.1.10.100.6.0
-
installed version is: BIG-IP 10.2.4 Build 817.0 Hotfix HF7
Without this general AOM access using ssh, I am not able to configure baud rate an the IP address. Does anyone know how to get around this issue?
Regards