Forum Discussion
6 Replies
Is GTM successfully communicating with the LTM, tcpdump will help you confirm that.
- TechgeeegNimbostratus
Hi Felix,
There could be multiple answer to your query, the GTM & LTM modules are on the same box or different?? If the modules are two separate units the iquery communication between the units should be established first. Once this is done and you have configured the auto discovery of VS then for sure it must show up. Follow the basics to find out the reason.
Regards,
- felixcccchen_16NimbostratusIn my case,GTM & LTM are on the different device OLD VS on LC, GTM still discover normally But.new vs set on LC,GTM can't discover it.......
- Techgeeeg_28888Nimbostratus
Hi Felix,
There could be multiple answer to your query, the GTM & LTM modules are on the same box or different?? If the modules are two separate units the iquery communication between the units should be established first. Once this is done and you have configured the auto discovery of VS then for sure it must show up. Follow the basics to find out the reason.
Regards,
- felixcccchen_16NimbostratusIn my case,GTM & LTM are on the different device OLD VS on LC, GTM still discover normally But.new vs set on LC,GTM can't discover it.......
- TechgeeegNimbostratus
Hi Felix,
In this case you have to check in the configuration in GTM if LC VS auto discovery is enabled or not? If it is not set to automatically discover the VS it will not discover and I believe that is the reason why you are not getting the new LC VS on GTM.
Regards,