Forum Discussion

jrmorris_151361's avatar
jrmorris_151361
Icon for Nimbostratus rankNimbostratus
Oct 19, 2015

Error when trying to upgrade VE LTM

I am trying to go from 11.4.1 to 11.6.0 on a VE LTM lab edition. I have re-activated my license, uploaded the new 11.6.0 ISO, and installed it. But when I try to change the boot location to the new location and hit activate, I get the following message, and it will not reboot. Thanks.

 

info: >++++ result: info: mount: proc already mounted or /mnt/tm_install/18834.r6vuPw/proc busy info: mount: according to mtab, proc is already mounted on /mnt/tm_install/18834.r6vuPw/proc info: >---- error: status 8192 returned by command: mount -t proc proc /mnt/tm_install/18834.r6vuPw/proc Could not access configuration destination; sda, 2 . umount: /mnt/tm_install/18834.r6vuPw: device is busy umount: /mnt/tm_install/18834.r6vuPw: device is busy umount: /mnt/tm_install/18834.r6vuPw: device is busy umount: /mnt/tm_install/18834.r6vuPw: device is busy umount: /mnt/tm_install/18834.r6vuPw: device is busy umount: /mnt/tm_install/18834.r6vuPw: device is busy umount: /mnt/tm_install/18834.r6vuPw: device is busy umount: /mnt/tm_install/18834.r6vuPw: device is busy umount: /mnt/tm_install/18834.r6vuPw: device is busy umount: /mnt/tm_install/18834.r6vuPw: device is busy

 

application delivery
LTM
management
virtualization

2 Replies

Sort By
  • Andy_McGrath's avatar
    Andy_McGrath
    Icon for Cumulonimbus rankCumulonimbus
    Oct 19, 2015

    I have this before long time ago (think 11.2 to 11.4), try upgrading to 11.5.x first then to 11.6.0. Personally I ended up building a new VE, on the later version, and migrating the cofiguration over as the upgraded VE always had minor issues never sure if was due to the upgrade or not.

     

  • jrmorris_151361's avatar
    jrmorris_151361
    Icon for Nimbostratus rankNimbostratus
    Oct 23, 2015

    I was able to figure out what was happening...

     

    I selected 'Yes' under Install configuration and chose the wrong path as the source path. Everything works fine if I select 'No' for install configuration.