NimbostratusWe have One Arm configuration, means only one Vlan for Client and Servers, Customer wants to make ether port channel between N7k and F5 ADC to bypass Spanning Tree, What Should be Port configuration on N7K access/ Trunk port ? What should be the Port configuration on F5 access or Trunk ?
Cirrostratusconf t inter po85 switchport switchport mode access switchport access vlan 500 vpc 85
inter eth1/5 switchport switchport mode access switchport access vlan 500 spanning-tree guard root channel-group 85 mode active
interface port-channel85 description F5 switchport mode trunk switchport trunk allowed vlan 500,510 vpc 85
interface Ethernet6/35 description L2 Interface for Viprion 1 Eth1/1.4 switchport mode trunk switchport trunk allowed vlan 500,510 spanning-tree port type edge trunk spanning-tree guard root channel-group 51 mode active no shutdown
Nimbostratus
NimbostratusNimbostratusNimbostratus
NimbostratusThis link has simmiler discussion. https://devcentral.f5.com/questions/configuring-trunk-with-cisco-nexus-7000
NimbostratusThis link has simmiler discussion. https://devcentral.f5.com/questions/configuring-trunk-with-cisco-nexus-7000
Nimbostratus