Forum Discussion

ovk773_281164's avatar
ovk773_281164
Icon for Nimbostratus rankNimbostratus
Jul 24, 2016

Cannot restore backup from ucs due to error in PEM listener config

Saving active configuration...
Current configuration backed up to /var/local/ucs/cs_backup.ucs.
Product : BIG-IP
Platform: Z100
Version : 11.6.0
Edition : Final
Hostname: test.com
Installing --full-- configuration on host test.com
Installing configuration...
Installing the license file...
Post-processing...
Reloading License and configuration - this may take a few minutes...
Jul 24 00:01:29 test.com emerg load_config_files: "/usr/bin/tmsh -n -g load sys config partitions all" - failed. -- 0107165e:3: The virtual servers list for the PEM listener (/Common/All-IP-PEM-Listener) must contain at least one virtual server that does not have a profile of type RADIUS or diameter-endpoint attached. Unexpected Error: Loading configuration process failed.
Jul 24 00:01:38 test.com emerg load_config_files: "/usr/bin/tmsh -n -g load sys config partitions all" - failed. -- 0107165e:3: The virtual servers list for the PEM listener (/Common/All-IP-PEM-Listener) must contain at least one virtual server that does not have a profile of type RADIUS or diameter-endpoint attached. Unexpected Error: Loading configuration process failed.
Configuration loading error: base-config-load-failed
For additional details, please see messages in /var/log/ltm

WARNING: There were one or more errors detected during installation.
         Check the error messages and take the proper actions if needed.
ERROR: UCS installation failed.
Operation aborted.
/var/tmp/configsync.spec: Error installing package
Config install aborted.
Unexpected Error: UCS loading process failed.

1 Reply

  • are you just restoring a config which you made on the same TMOS version / platform or are you trying to restore it on a newer version / different platform?

     

    do you agree with the message, do you have a virtual server like the message says?

     

    you can open the ucs, remove that part of the config and then load that part. you can then rebuild what was left out via the GUI

     

    https://devcentral.f5.com/questions/edit-config-in-ucs

     

    https://devcentral.f5.com/questions/edit-ucs