HI,
Thanks for the response. Yes I am using the virtual edition. I configured the VLAN's and Self IP's using the GUI. The virtual servers IP is 192.168.160.10 and arp is enabled on this address. Here is a copy of the requested info:
b virtual CSA-VIP lis
BIGpipe parsing error:
012e0020:3: The requested item (lis) is invalid ( | show | list | edit | delete | stats reset) for 'virtual'.
[root@LAB-F5:Active] config b virtual CSA-VIP list
virtual CSA-VIP {
snat automap
pool CSA-HA-POOL
destination 192.168.160.10:any
ip protocol tcp
rules CSA-Active-Standby
vlans VLAN20 enable
[root@LAB-F5:Active] config b virtual CSA-VIP show
VIRTUAL ADDRESS 192.168.160.10 UNIT 1
| ARP enable
| (cur, max, limit, tot) = (0, 0, 0, 0)
| (pkts,bits) in = (0, 0), out = (0, 0)
+-> VIRTUAL CSA-VIP SERVICE any
| PVA acceleration none
| (cur, max, limit, tot) = (0, 0, 0, 0)
| (pkts,bits) in = (0, 0), out = (0, 0)
| requests (total) = 0
+-> RULE CSA-Active-Standby
+-> CLIENT_ACCEPTED 0 total 0 fail 0 abort
+-> POOL CSA-HA-POOL LB METHOD round robin MIN/CUR ACTIVE MEMBERS 2/2
| (cur, max, limit, tot) = (0, 0, 0, 0)
| (pkts,bits) in = (0, 0), out = (0, 0)
+-> POOL MEMBER CSA-HA-POOL/192.168.150.100:http active,up
| | session enabled priority 5 ratio 1
| | (cur, max, limit, tot) = (0, 0, 0, 0)
| | (pkts,bits) in = (0, 0), out = (0, 0)
| | requests (total) = 0
+-> POOL MEMBER CSA-HA-POOL/192.168.150.101:http active,up
| session enabled priority 1 ratio 1
| (cur, max, limit, tot) = (0, 0, 0, 0)
| (pkts,bits) in = (0, 0), out = (0, 0)
| requests (total) = 0
b pool CSA-HA-POOL list
pool CSA-HA-POOL {
min active members 2
monitor all gateway_icmp
members {
192.168.150.100:http {
priority 5
}
192.168.150.101:http {
priority 1
}
}
}
[root@LAB-F5:Active] config b pool CSA-HA-POOL show
POOL CSA-HA-POOL LB METHOD round robin MIN/CUR ACTIVE MEMBERS 2/2
| (cur, max, limit, tot) = (0, 0, 0, 0)
| (pkts,bits) in = (0, 0), out = (0, 0)
+-> POOL MEMBER CSA-HA-POOL/192.168.150.100:http active,up
| | session enabled priority 5 ratio 1
| | (cur, max, limit, tot) = (0, 0, 0, 0)
| | (pkts,bits) in = (0, 0), out = (0, 0)
| | requests (total) = 0
+-> POOL MEMBER CSA-HA-POOL/192.168.150.101:http active,up
| session enabled priority 1 ratio 1
| (cur, max, limit, tot) = (0, 0, 0, 0)
| (pkts,bits) in = (0, 0), out = (0, 0)
| requests (total) = 0