Forum Discussion

Stefan_Klotz's avatar
Stefan_Klotz
Icon for Cumulonimbus rankCumulonimbus
Apr 26, 2021

Statistics Collection stopped working after BIG-IQ upgrade to 7.1

We were updating BIG-IQ from 5.4 to 7.1 via 6.1 (direct update was not possible due to timeout issue with the DCDs). All our BIG-IP devices are running on 15.1.2.1. We have a single BIG-IQ CM and a two node DCD-cluster.

The "Stats Last Collection Date" on BIQ-IQ shows "Jan 01, 1970 01:00:00(CET)" for all BIG-IP devices.

AVR module is provisioned on the devices and we also tried to fully remove the device and add with rediscover/reimport, but still the same behavior.

Any idea how to further troubleshot this or what's the reason for this?

Thank you!

 

Ciao Stefan :)

4 Replies

  • Have you checked and followed this as there is only info how to migrate statistics ?:

     

    https://techdocs.f5.com/en-us/bigiq-7-1-0/upgrading-big-iq-with-dcd-from-6-x-minimal-downtime/overview-upgrade-dcd-clusters-with-min-down.html

  • Hi Nikoolayy1,

    thanks for the link, but there they referring to a minimum of a three-node DCD-cluster.

    We just have two DCD-nodes.

    Do you have any experiences, if we missed the "Prepare statistics for upgrade" script?

    From what I found out so far, it looks like, that since 13.1 BIG-IQ is not polling the statistics anymore, but the BIG-IP will push it via the AVR-module. Might this be a problem for FW-rules as the direction changes? I can't remember correctly anymore, but last Friday it looks like that there are just SYN-pakets on the BIG-IP devices towards the DCDs, which would confirm the FW-topic.

    Or do you have maybe any other ideas, which logs I can check or which commands might provide useful output?

    Thank you!

     

    Ciao Stefan ;)

  • It looks like we have the following two issues:

    1. There are no dedicated mgmt-routes towards the BIG-IQ and DCDs, therefor the DFGW of the tmm-interfaces will be used. This was not visible for us before, because with the older version the BIG-IQ itself was initiating the connections and response traffic was working due to auto-last-hop.
    2. After adding the mgmt-routes for one BIG-IP cluster (for testing) it was still not working due to missing FW-rules. As I mentioned before the direction changed and also we created only FW-rules between the BIG-IQ CM, but not for the DCDs before.

    We are currently adjusting these issues and will report back once implemented.

    Thank you!

     

    Ciao Stefan :)