Hi Brad Thanks for the response. I have followed the procedure but the gtm_add keeps failing. It succeeded once but did not copy the GSLB objects across
I get the following error although I ping the address and telnet to the port 4353. I can also see the GTM's communicating when i do a tcpdump
Enter the IP address of a remote GTM BIG-IP from which
you want to copy the configuration:
10.75.22.4
==> Running 'bigstart shutdown gtmd' on the local system
==> Running 'bigstart shutdown zrd' on the local system
==> Running 'bigstart shutdown named' on the local system
Retrieving remote and installing local BIG-IP's SSL certs ...
Enter root password if prompted
Password:
Rekeying Master Key...
Saving running configuration...
/config/bigip.conf
/config/bigip_base.conf
/config/bigip_user.conf
Verifying iQuery connection to 10.75.22.4. This may take up to 30 seconds
iQuery connection to 10.75.22.4 failed.
Is big3d running?
Is tcp port 4353 access allowed?
Restarting gtmd
Restarting named
Restarting zrd
root@(GTM-1)(cfg-sync In Sync)(gtmd DOWN)(/Common)(tmos)