error log 'dma_intr:error=' inmessage log file
Dear All I did reboot bigip6400. And then check the logs whether there is any error or not. I found the error or something ,below.. Jun 21 12:47:50 dmz hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } Jun 21 12:47:50 dmz hdc: dma_intr: error=0x40 { UncorrectableError }, LBAsect=79853387, high=4, low=12744523, sector=27012352 Jun 21 12:47:50 dmz end_request: I/O error, dev 16:08 (hdc), sector 27012352 Jun 21 12:48:03 dmz hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } Jun 21 12:48:03 dmz hdc: dma_intr: error=0x40 { UncorrectableError }, LBAsect=79853387, high=4, low=12744523, sector=27012360 Jun 21 12:48:03 dmz end_request: I/O error, dev 16:08 (hdc), sector 27012360 . . . I know, BIG-IP 6400 have Compact flash. It dosen’t support DMA. And read that related Sol doc. I think that message logs should be up when the unit is rebooted only.. However; after the reboot is completed, it appears continuesly… I want to know that these errors will not impact the operational status of the BIG-IP system