Dos Attacks not showing on dashboard
Issue: DoS attacks are not showing on the DoS dashboard. Information: Strange part is this was working but then I made a few changes to split this particular virtual server into internal and external VIPs only apply DoS profile to external VIP. I have a DoS logging profile enabled on this VS I know attacks are happening as I can see them under Security > Event logs > DoS > Application Events However, any of the new attack ids don’t show under the DoS Dashboard located Security > Reporting > DoS > Dashboards Any thoughts on how to fix would be much appreciated? Thanks!Why does the Local Traffic policy allow Bot profile to be selected but the iRule can't ?
When I attach DOS and BOT profiles with local traffic policy or iRule I always need a default BOT and DOS profile even when I have a default rule that catches all the traffic. That is one thing but the strangest thing is when I decide to attach a Bot profile with iRule it does not work but the Local traffic policies allow this. I will need to test this but is really strange. This is the first time something is only possible with Local Traffic Policies but I will have to test if it works 🙂
traffic flow between IPI, application security policy, bot detection, DoS protection, irule, and geolocation
I want to know how the traffic flow between IPI, application security policy, bot detection, DoS protection, irule, and Geolocation (using irule for Geolocation). I am using Global IPI (mean IPI does not attached to any VS) and have an irule for Geolocation and only have module ASM and LTM (No APM and AFM). I understand that irule can be arranged by the order. The application security policy, bot detection, DoS protection, irule are attached to VS. Here is what I understand the traffic flow. The traffic hits Global IPI -> reached VS for irules in order (including Geolocation, I always put Geolocation at first place) -> Application security policy -> DoS -> Bot detection. Is this correct? Or will application security policy , Dos, Bot detection happen at the same time? What is the best practice for Geolocation? Using an irule for Geolocation or using Geolocation in application security policy?
IP-Intelligence Manual Additions and Bad Actor Additions Not Working
Greetings dev central community, I have come to impasses in two goals on a 15.1.0.5 VE running in esxi related to IP-Intelligence configuration and I would very much appreciate direction for resolution. Impasse 1: Having my manually added IP address be respected by the IP-Intelligence policy.Though pre-existing blacklisted sources are dropped with my configuration, my manually added IP addresses added via are not respected. I'm adding the IP addresses to my categories configured for drop in my IP-Intelligence policy via Security ›› Network Firewall : IP Intelligence : Blacklist Categories >> Add to Category. I've tried with public and private IP's. I've tried with pre-existing and custom blacklist categories. My license is valid. iprep_lookup from the CLI shows no verdict/category for the manually added IP's. Where as the GUI "Check Entry" button shows the IP address as present in the blacklisted category. Impasse 2: DoS blacklisting via Bad Actor Detection is not updating the blacklist category with the offending IP address. My tests have been done via Device DoS Protection via ICMPv4 flooding. I can see the attack vector being rate limited in DoS logs. My settings to add to the bad actor to the blacklist category are set low (Sustained Attack Detection Time of 10 seconds). Even if my test source attacks for a prolonged period of time and is mitigated for this prologed period of time, the address never shows up in the blacklist category specified. I have tried custom categories as well as the pre-made denial-of-service category. I have selected to advertise externally and I have BGP setup to redistribute kernel. Regardless, the IP address that should be shunned does not show up in the routing table as a local blackholed kernel route nor does it show up in the upstream BGP peer as a blackholed route. Manually configured blackholed routes are propogated properly via redistribute kernel. GUI "Check Entry" button does not show the IP address as present in the specified bad actor specified category. I have tried triggering the attack vector/bad actor protection private IP's as well as spoofed public IP's. list security dos device-config dos-device-vector icmpv4-flood allow-advertisement enabled allow-upstream-scrubbing disabled attacked-dst disabled auto-blacklisting enabled auto-scrubbing disabled auto-threshold disabled bad-actor enabled blacklist-category denial_of_service blacklist-detection-seconds 10 blacklist-duration 14400 ceiling 200000 default-internal-rate-limit 100000 detection-threshold-percent 500 detection-threshold-pps 10000 enforce enabled floor 100 multiplier-mitigation-percentage 300 packet-types none per-dst-ip-detection-pps infinite per-dst-ip-limit-pps infinite per-source-ip-detection-pps 1000 per-source-ip-limit-pps 10000 scrubbing-category attacked_ips scrubbing-detection-seconds 10 scrubbing-duration 900 simulate-auto-threshold disabled state mitigate suspicious false threshold-mode manual-multiplier-mitigation valid-domains none
Can the F5 Mitigate the HTTP/2 vulnerabilities?
Hi, We are considering implementing HTTP/2 in our environment at the moment. In August a number of DoS vulnerabilities were identified in HTTP/2. If we make the change for HTTP/2 on the F5, does the F5 do anything to mitigate the risk? https://nakedsecurity.sophos.com/2019/08/19/netflix-finds-multiple-http2-dos-flaws/ Are there ASM signatures that protect against these issues? If so, what about protection on APM if we add HTTP/2 there? Any information would be appreciated.
Apply ASM DOS profile to a single virtual server? Different DOS thresholds to different virtual servers?
Env: LTM 11.5.2 on hardware appliances (4200, 2000) Maybe I'm just missing it and this is a stupid question - but is there a way to apply Denial of Service protections to a single virtual server's traffic in the ASM module? Or different thresholds for different virtual servers? Everything I'm reading seems to be implying that once you set a profile it applies to ALL traffic to the LTM. Is that correct? Thanks!
ASM - Proactive Bot Defense - No Logs?
Hi all I have a Virtual Server with an Application Security and DoS Profile applied to it. The DoS profile just contains Proactive Bot Defense, Always On. Other features of DoS profile are off. I can see it working when turned on, by cURL'ing the site and seeing the JS response. However these events aren't showing up in any logs, is that expected? It would be nice to be able to see blocked/denied requests to the site to ensure i haven't broken journeys for our customers. Any help would be much appreciated
