Hi,
I have noticed that on "BIGIP-F5-2.w2k16.com" you have "Mirroring IP 192.168.93.102" which not exist on "BIGIP-F5-1.w2k16.com", so first i would suggest to disable the mirroring on the device and configure Specific "Connection Mirroring" Per VS.
OR, setup the primary mirroring ip "BIGIP-F5-1.w2k16.com" Self IP on both units in the Traffic group & secondary mirroring ip on both units.
run this command to see the status of the HA mirror status - tmsh show sys ha-mirror.
it should look like this :
On Active Device
Sys::HA Mirror Status
Traffic Group TMM Primary Secondary Aborts Overflows Errors Buffered L4 Mirror L7 Mirror L7 Failed
traffic-group-1 [0.0] connected closed 1 0 0 0 0 104 64
traffic-group-1 [0.1] connected closed 1 0 0 0 0 106 58
On Standby Device:
Sys::HA Mirror Status
Traffic Group TMM Primary Secondary Aborts Overflows Errors Buffered L4 Mirror L7 Mirror L7 Failed
traffic-group-1 [0.0] connected closed 1 0 2 0 0 40 0
traffic-group-1 [0.1] connected closed 1 0 2 0 0 50 0
Hope it helped, Shiran.