Forum Discussion

aboulleill_3013's avatar
aboulleill_3013
Icon for Nimbostratus rankNimbostratus
Jun 05, 2017

health monitor issue from partition

Dears,   I have a strange behavior on my f5 BIG-IP (version 11.4.1) related to health monitor on nodes & pools. The f5 is partitioned into 3 partitions along with default common partition. Each pa...
application delivery
LTM
Ilian_Ivanov's avatar
Ilian_Ivanov
Icon for Nimbostratus rankNimbostratus
Jun 05, 2017

Hi,

 

You can check what is your source IP address when trying to connect to the server.

 

"ip route get SERVER_IP" in bash mode. Just be sure that you are in the correct partition.

 

For example:

 

(bigIP)(cfg-sync In Sync)(Active)(/Common)(tmos) bash

 

[bigIP:Active:In Sync] ~ rdexec 2 bash

 

[bigIP:Active:In Sync:%2] ~ [bigIP:Active:In Sync:%2] ~ ip route get 1.1.1.1 1.1.1.1 via 10.10.10.1 dev eth0 src 10.10.10.71 cache mtu 1500 advmss 1460 hoplimit 64

 

Then I can suggest you to check if that IP/Port are allowed on your FW. Have in mind that 10.10.10.71 is your self-IP, you will need to allow also the floating IP address (if you have one).